Mi impresora: Artillery Genius Pro
Placa Madre: Artillery Ruby v1.2.
Pantalla / TFT
MCU de la pantalla: GD32F305.
Placa de la pantalla: TFT Controller v1.2.

Intrucciones

Te explico lo que a mi me funciono. Usa una microSD formateada en fat32, no mayor a 8GB.

Primero instala el firmware original, instala en tu impresora lo que esta en la carpeta: "1 - Firmware Original + M600".
Adentro de esa carpeta hay otra que se llama "SD", todo lo que este ahí dentro, lo pasas a una microSD.
Luego lo insertas en la impresora apagada y la enciendes, deja que termine el proceso, (demora) (El sistema arranca solo, no toques nada).

Después que termine todo, prueba si funciona el menú (va a ser igual que el original "Una mierda") y has un calibrado home, cuando termine, apágala.

Ahora elimina todo lo de la microSD y agrégale todos los archivos de la carpeta "SD" dentro de "2 - Flashear TFT DISPLAY".

Dentro de la carpeta "2 - Flashear TFT DISPLAY" hay una carpeta llamada "Temas" (Cambia los Iconos), busca el que mas te guste y remplaza la carpeta "TFt28" de la microSD. Inserta la microSD en la impresora y enciéndela (también va a demorar)(No toques nada el sistema arranca solo).

Una vez que arranque haz el calibrado de pantalla y también haz un home.

Ahora toca cambiar el idioma si lo deseas. Borra tu microSD e incorpora tu idioma .ini en la microSD, pon la microSD en la impresora apagada y enciéndela, cuando termine ve al menú y selecciona tu idioma, listo ya esta para usar.

Una vez que tengas todo, tienes que volver a calibrar todo de nuevo, calibrado completo.

Dentro de los archivos hay uno que descargue que es la carpeta "Flashear MARLIN", yo sinceramente no la use, la dejo por si le llega a servir a alguien.

Sígueme en mis redes sociales:

IG: Impresiones.parana

Cults: https://cults3d.com/es/usuarios/LAB-3D/modelos-3d

Pagina WEB: lab-3d.kesug.com

Deja una donación, si puedes.


------------------------------------------------------------------------------------

English


My Printer

Model: Artillery Genius Pro

Mainboard: Artillery Ruby v1.2

Screen / TFT:

TFT MCU: GD32F305

TFT Board: TFT Controller v1.2

Instructions

Here’s what worked for me.
Use a microSD card formatted to FAT32, no larger than 8GB.

1️⃣ First Step — Install the Original Firmware

Install on your printer everything that’s inside the folder:
“1 - Firmware Original + M600”

Inside that folder, there’s another one called “SD” — copy everything inside it to your microSD card.

Then insert the microSD into your printer while it’s powered off, and turn it on.
Let the process finish (it takes a while).
⚠️ Don’t touch anything — the system starts and completes automatically.

After it’s done, check if the menu works (it’ll look the same as the original, pretty basic 😅).
Do a Home calibration, and when it finishes, power it off.

2️⃣ Second Step — Flash the TFT Display

Now delete everything from the microSD and copy all the files from the folder:
“SD” inside “2 - Flashear TFT DISPLAY”

In that same folder there’s another one called “Themes” (it changes the icons).
Pick the theme you like best and replace the “TFT28” folder on your microSD with it.

Insert the microSD into the printer and turn it on.
It’ll take a little while again — don’t touch anything, it runs automatically.

When it boots up, calibrate the touchscreen and then do another Home.

3️⃣ Change the Language (optional)

If you want to change the language, clear your microSD and copy your language .ini file to it.
Insert the microSD into the printer (powered off), then turn it on.
When it’s done, go to the menu and select your language — that’s it, ready to use.

Once everything’s installed, you should recalibrate everything again — do a full calibration.

Inside the files, there’s also one folder called “Flashear MARLIN” that I downloaded.
Honestly, I didn’t use it myself, but I’m including it in case it helps someone else.

Follow me on social media:

Instagram: Impresiones.parana

Cults3D: https://cults3d.com/es/usuarios/LAB-3D/modelos-3d

Website: lab-3d.kesug.com

💛 If you can, leave a donation — it really helps!
